SignalCheck Pro v4.22

SignalCheck allows users to check the true signal strength of their connections. Unlike the standard Android signal bars, which typically only display the 1xRTT (voice and low-speed data) signal strength, SignalCheck will show you detailed signal information about all of your device’s connections, including 1X, GSM, EV-DO or eHRPD (3G), LTE (4G), and Wi-Fi.

-

Special thanks to S4GRU for their tremendous support of SignalCheck from the beginning! Visit http://www.S4GRU.com for up-to-the-minute information and discussions about Sprint’s Network Vision strategy, as well as talk about devices and other cellular networks. There is a SignalCheck discussion thrd too!
SignalCheck will display LTE Cell ID information on many devices, as well as some devices by other manufacturers running Android 4.2 or higher. SignalCheck was one of the first (if not THE first) Android apps to provide this information to users.
A configurable SignalCheck widget can be added to your home screen, showing your rltime connection type and signal strengths.
SignalCheck also displays the current connection type along with the carrier name, or the System ID of the carrier if roaming.
One of the best ftures of SignalCheck are the notifiion icon(s). A user-customizable icon shows your data connection strength in the notifiion ar at the top of the screen, and more details can be seen in the pulldown menu. Your signal strength is always at the top of the screen along with your other icons.. no need to open the app to check your connections. The icons are customizable, showing signal bars, connection type, digital signal strength in dBm, or connection type with signal strength. A secondary icon can be enabled to always display the 1xRTT signal for users who wish to compare their signal strengths rltime. All of this is customizable from within the app! Users can configure this to automatically start when their device boots up if they choose to.
SignalCheck can also notify the user with optional audio and/or vibrating alerts when a 4G LTE connection is discovered. This is handy for users traveling in new cities, or if your carrier’s network is being upgraded — know immediately when you have a high-speed connection! Sprint users can also enable alerts to notify them when they connect to 800MHz SMR.
Curious as to which tower you are connected to? SignalCheck will not only show you the ID, but also the street address of the 1X tower or sector on most MA networks! Clicking on the address will automatically show the loion through your mapping app. Plse note, this fture is provider-dependent, as some (Verizon Wireless) block the loion information, and others (Sprint) offset the loion by a short distance to indie which sector you are on. Loion information is also not available for GSM-based networks.
SignalCheck has an option to quickly reset your data connections from within the app (root required on Android 4.2+). Another option allows users to start checking their signals as soon as their device boots, enabling the notifiion icon(s) immediately.
SignalCheck provides sy access to advanced Android screens such as Data, Debug, Engineering, EPST, and Field Trial, along with Battery Info, Field Trial, Mobile Networks, and Wi-Fi info. These screens are alrdy available on most Android devices, but are only accessible by special dialer .
SignalCheck is a grt compliment to the Sensorly app, allowing you to check your signal strengths and map them out so other users can see the data as well.
This app has also been referred to as Signal Check, Signal Check LTE, LTE Signal Check, and LTE Checker, among other things. Users checking their signals on the Sprint network will see the most benefit from this app as their Network Vision nationwide upgrade rolls out, but Boost, Verizon, AT&T, T-Mobile, and international users can also check their signals and see detailed information about their connections.
What’s New in SignalCheck Pro v4.22

Added relse date to About screen.

Added “Hidden Menu” back to System Shortcuts.

Added workaround for Android 4.4+ bug which stops icon and widget updates; 4.4 devices now require the main status bar icon to be enabled for now.

Resolved issue with force closes when connecting to LTE in certain situations.

Resolved issue with no connection showing when in LTE-only mode.
More Info in Google Play

Down File from Google Drive

Down File from Dropbox.com




Source: APKDROID.NET